centos7.9单机版安装K8s
1.安装docker
[root@localhost ~]# hostnamectl set-hostname master
[root@localhost ~]# bash
[root@master ~]# mv /etc/yum.repos.d/* /home
[root@master ~]# curl -o /etc/yum.repos.d/CentOS-Base.repo http://mirrors.aliyun.com/repo/Centos-7.repo
[root@master ~]# curl -fsSL https://get.docker.com | bash -s docker --mirror Aliyun
[root@master ~]# systemctl enable docker --now
Created symlink from /etc/systemd/system/multi-user.target.wants/docker.service to /usr/lib/systemd/system/docker.service.
[root@master ~]# cat /etc/docker/daemon.json
{
"exec-opts":["native.cgroupdriver=systemd"]
}
[root@master ~]# systemctl daemon-reload &&systemctl restart docker
2.系统调优
#关闭防火墙、设置selinux
[root@master ~]# systemctl stop firewalld&&systemctl disable firewalld&&setenforce 0
[root@master ~]# vim /etc/selinux/config
SELINUX=disabled
#关闭交换分区
[root@master ~]# swapoff -a
[root@master ~]# vim /etc/fstab
#/dev/mapper/centos-swap swap swap defaults 0 0
#配置主机名解析
[root@master ~]# vim /etc/hosts
192.168.1.99 master
#转发IPv4并让iptables看到桥接流量
cat >/etc/modules-load.d/k8s.conf <<EOF
overlay
br_netfilter
EOF
modprobe overlay
modprobe br_netfilter
cat >/etc/sysctl.d/k8s.conf <<EOF
net.bridge.bridge-nf-call-iptables=1
net.bridge.bridge-nf-call-ip6tables=1
net.ipv4.ip_forward=1
EOF
sysctl --system
3.安装cri-docker
下载cri-docker,安装容器进行时
[root@master ~]# yum install -y wget
这里国内下载失败，建议挂梯子下载到本地进行上传
[root@master ~]# wget https://github.com/Mirantis/cri-dockerd/releases/download/v0.3.15/cri-dockerd-0.3.15.amd64.tgz
[root@master ~]# tar zxvf cri-dockerd-0.3.15.amd64.tgz
ockerd
[root@master ~]# mv cri-dockerd/cri-dockerd /usr/bin/
配置服务文件
[root@master ~]# cat /usr/lib/systemd/system/cri-docker.service
[Unit]
Description=CRI Interface for Docker Application Container Engine
Documentation=https://docs.mirantis.com
After=network-online.target firewalld.service docker.service
Wants=network-online.target
Requires=cri-docker.socket
[Service]
Type=notify
ExecStart=/usr/bin/cri-dockerd --network-plugin=cni --pod-infra-container-image=registry.aliyuncs.com/google_containers/pause:3.10
ExecReload=/bin/kill -s HUP $MAINPID
TimeoutSec=0
RestartSec=2
Restart=always
StartLimitBurst=3
StartLimitInterval=60s
LimitNOFILE=infinity
LimitNPROC=infinity
LimitCORE=infinity
TasksMax=infinity
Delegate=yes
KillMode=process
[Install]
WantedBy=multi-user.target
[root@master ~]# cat /usr/lib/systemd/system/cri-docker.socket
[Unit]
Description=CRI Docker Socket for the API
PartOf=cri-docker.service
[Socket]
ListenStream=%t/cri-dockerd.sock
SocketMode=0660
SocketUser=root
SocketGroup=docker
[Install]
WantedBy=sockets.target
[root@master ~]# systemctl daemon-reload
[root@master ~]# systemctl enable cri-docker --now &&systemctl status cri-docker
4.配置containerd
[root@master ~]# containerd config default > /etc/containerd/config.toml
[root@master ~]# vim /etc/containerd/config.toml
SystemdCgroup = true
[root@master ~]# systemctl restart containerd&&systemctl enable containerd
Created symlink from /etc/systemd/system/multi-user.target.wants/containerd.service to /usr/lib/systemd/system/containerd.service.
5.配置k8s yum仓库
cat <<EOF | sudo tee /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=https://pkgs.k8s.io/core:/stable:/v1.31/rpm/
enabled=1
gpgcheck=1
gpgkey=https://pkgs.k8s.io/core:/stable:/v1.31/rpm/repodata/repomd.xml.key
exclude=kubelet kubeadm kubectl cri-tools kubernetes-cni
EOF
sudo yum install -y kubelet kubeadm kubectl --disableexcludes=kubernetes
sudo systemctl enable --now kubelet6.初始化K8s集群
[root@master ~]# kubeadm config print init-defaults > kubeadm-config.yaml
[root@master ~]# vim kubeadm-config.yaml
apiVersion: kubeadm.k8s.io/v1beta4
bootstrapTokens:
- groups:
- system:bootstrappers:kubeadm:default-node-token
token: abcdef.0123456789abcdef
ttl: 24h0m0s
usages:
- signing
- authentication
kind: InitConfiguration
localAPIEndpoint:
advertiseAddress: 192.168.1.99
bindPort: 6443
nodeRegistration:
criSocket: unix:///var/run/cri-dockerd.sock
imagePullPolicy: IfNotPresent
imagePullSerial: true
name: master
taints: null
timeouts:
controlPlaneComponentHealthCheck: 4m0s
discovery: 5m0s
etcdAPICall: 2m0s
kubeletHealthCheck: 4m0s
kubernetesAPICall: 1m0s
tlsBootstrap: 5m0s
upgradeManifests: 5m0s
---
apiServer: {}
apiVersion: kubeadm.k8s.io/v1beta4
caCertificateValidityPeriod: 87600h0m0s
certificateValidityPeriod: 8760h0m0s
certificatesDir: /etc/kubernetes/pki
clusterName: kubernetes
controllerManager: {}
dns: {}
encryptionAlgorithm: RSA-2048
etcd:
local:
dataDir: /var/lib/etcd
imageRepository: registry.aliyuncs.com/google_containers
kind: ClusterConfiguration
kubernetesVersion: 1.31.0
networking:
dnsDomain: cluster.local
serviceSubnet: 10.96.0.0/12
proxy: {}
scheduler: {}
[root@master ~]# vim kubeadm-config.yaml
新增
kind: KubeletConfiguration
apiVersion: kubelet.config.k8s.io/v1beta1
cgroupDriver: "systemd"
[root@master ~]# systemctl restart kubelet
编辑 /etc/default/grub 文件，添加 systemd.unified_cgroup_hierarchy=0 到 GRUB_CMDLINE_LINUX 行
[root@master ~]# bash
[root@master ~]# grub2-mkconfig -o /boot/grub2/grub.cfg
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-3.10.0-1160.el7.x86_64
Found initrd image: /boot/initramfs-3.10.0-1160.el7.x86_64.img
Found linux image: /boot/vmlinuz-0-rescue-fb69d0cc8cb44f40959b8de6635f63a0
Found initrd image: /boot/initramfs-0-rescue-fb69d0cc8cb44f40959b8de6635f63a0.img
done
[root@master ~]# reboot
[root@master ~]# systemctl restart containerd
[root@master ~]# systemctl restart kubelet
[root@master ~]# kubeadm init --config kubeadm-config.yaml
Your Kubernetes control-plane has initialized successfully!
To start using your cluster, you need to run the following as a regular user:
mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config
Alternatively, if you are the root user, you can run:
export KUBECONFIG=/etc/kubernetes/admin.conf
You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
https://kubernetes.io/docs/concepts/cluster-administration/addons/
Then you can join any number of worker nodes by running the following on each as root:
kubeadm join 192.168.1.99:6443 --token abcdef.0123456789abcdef \
--discovery-token-ca-cert-hash sha256:a6ecf61ca34fe2994e17708179990c210ecb954c0a96b4386bd85934f123d43d
[root@master ~]# mkdir -p $HOME/.kube
[root@master ~]# sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
[root@master ~]# sudo chown $(id -u):$(id -g) $HOME/.kube/config
[root@master ~]# kubectl get nodes
NAME STATUS ROLES AGE VERSION
master NotReady control-plane 36s v1.31.2
7.安装网络插件
[root@master ~]# cat /etc/docker/daemon.json
{
"exec-opts":["native.cgroupdriver=systemd"],
"registry-mirrors": [
"https://docker.unsee.tech",
"https://dockerpull.org",
"https://docker.1panel.live",
"https://dockerhub.icu"
]
}
[root@master ~]# systemctl daemon-reload &&systemctl restart docker
[root@master ~]# docker pull docker.io/calico/cni:master
[root@master ~]# docker pull docker.io/calico/node:master
[root@master ~]# docker pull docker.io/calico/kube-controllers:master
[root@master ~]# curl -o calico.yaml https://github.com/projectcalico/calico/blob/master/manifests/calico.yaml
[root@master ~]# kubectl apply -f calico.yaml
[root@master ~]# kubectl get pods -n kube-system
NAME READY STATUS RESTARTS AGE
calico-kube-controllers-7bcf789c97-vszz9 1/1 Running 0 24s
calico-node-cvspq 1/1 Running 0 24s
coredns-855c4dd65d-c6mrt 1/1 Running 0 24m
coredns-855c4dd65d-jdxjb 1/1 Running 0 24m
etcd-master 1/1 Running 1 (14m ago) 24m
kube-apiserver-master 1/1 Running 1 (14m ago) 24m
kube-controller-manager-master 1/1 Running 2 (2m2s ago) 24m
kube-proxy-ll54k 1/1 Running 1 (14m ago) 24m
kube-scheduler-master 1/1 Running 1 (14m ago) 24m
[root@master ~]# kubectl get nodes
NAME STATUS ROLES AGE VERSION
master Ready control-plane 25m v1.31.2
8.k8s命令补全
[root@master ~]# yum -y install bash-completion
[root@master ~]# source /usr/share/bash-completion/bash_completion
[root@master ~]# source <(kubectl completion bash)
[root@master ~]# echo "source <(kubectl completion bash)" >> ~/.bashrc
[root@master ~]# kubectl
annotate (更新一个资源的注解) explain (Get documentation for a resource)
api-resources (Print the supported API resources on the server) expose (Take a replication controller, service, deployment or pod and expose it as a new Kubernetes service)
api-versions (Print the supported API versions on the server, in the form of "group/version") get (显示一个或多个资源)
apply (Apply a configuration to a resource by file name or stdin) help (Help about any command)
attach (挂接到一个运行中的容器) kustomize (Build a kustomization target from a directory or URL)
auth (Inspect authorization) label (更新某资源上的标签)
autoscale (Auto-scale a deployment, replica set, stateful set, or replication controller) logs (打印 Pod 中容器的日志)
certificate (Modify certificate resources) options (输出所有命令的层级关系)
cluster-info (Display cluster information) patch (Update fields of a resource)
completion (Output shell completion code for the specified shell (bash, zsh, fish, or powershell)) plugin (Provides utilities for interacting with plugins)
config (修改 kubeconfig 文件) port-forward (将一个或多个本地端口转发到某个 Pod)
cordon (标记节点为不可调度) proxy (运行一个指向 Kubernetes API 服务器的代理)
cp (Copy files and directories to and from containers) replace (Replace a resource by file name or stdin)
create (Create a resource from a file or from stdin) rollout (Manage the rollout of a resource)
debug (Create debugging sessions for troubleshooting workloads and nodes) run (在集群上运行特定镜像)
delete (Delete resources by file names, stdin, resources and names, or by resources and label selector) scale (Set a new size for a deployment, replica set, or replication controller)
describe (显示特定资源或资源组的详细信息) set (为对象设置指定特性)
diff (Diff the live version against a would-be applied version) taint (更新一个或者多个节点上的污点)
drain (清空节点以准备维护) top (Display resource (CPU/memory) usage)
edit (编辑服务器上的资源) uncordon (标记节点为可调度)
events (List events) version (输出客户端和服务端的版本信息)
exec (在某个容器中执行一个命令) wait (Experimental: Wait for a specific condition on one or many resources)
原文地址：https://blog.csdn.net/weixin_65562581/article/details/143868498
免责声明：本站文章内容转载自网络资源，如本站内容侵犯了原著者的合法权益，可联系本站删除。更多内容请关注自学内容网（zxcms.com）！