自学内容网 自学内容网
自学内容网 > 正文

20241107给荣品PRO-RK3566开发板刷Rockchip原厂的Android13并配置永不休眠

🕗 发布于 2024-11-09 03:46 杂质  

Y:\repo_rk356x_android13\device\rockchip\rk356x\rk3566_t\BoardConfig.mk
#
# Copyright 2014 The Android Open-Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
include device/rockchip/rk356x/BoardConfig.mk
BUILD_WITH_GO_OPT := false

PRODUCT_UBOOT_CONFIG := rk3566
#PRODUCT_KERNEL_DTS := rk3566-evb2-lp4x-v10
PRODUCT_KERNEL_DTS := pro-rk3566
BOARD_GSENSOR_MXC6655XA_SUPPORT := true
BOARD_CAMERA_SUPPORT_EXT := true
BOARD_HS_ETHERNET := true

# AB image definition
BOARD_USES_AB_IMAGE := false
BOARD_ROCKCHIP_VIRTUAL_AB_ENABLE := false
BOARD_ROCKCHIP_VIRTUAL_AB_COMPRESSION_WITH_GKI_ENABLE := false

ifeq ($(strip $(BOARD_USES_AB_IMAGE)), true)
    include device/rockchip/common/BoardConfig_AB.mk
    TARGET_RECOVERY_FSTAB := device/rockchip/rk356x/rk3566_t/recovery.fstab_AB
endif


20241107给荣品PRO-RK3566开发板刷Rockchip原厂的Android13并配置永不休眠
2024/11/7 9:15


1、
Y:\repo_rk356x_android13\device\rockchip\common\device.mk
ifeq ($(strip $(TARGET_BOARD_PLATFORM_PRODUCT)), box)
    #include device/rockchip/common/samba/rk31_samba.mk
    PRODUCT_COPY_FILES += \
      $(LOCAL_PATH)/init.box.samba.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.box.samba.rc \
      device/rockchip/common/cifsmanager.sh:system/bin/cifsmanager.sh

    PRODUCT_PROPERTY_OVERRIDES += \
      ro.rk.screenoff_time=2147483647
else
PRODUCT_PROPERTY_OVERRIDES += \
    ro.rk.screenoff_time=60000
endif


修改为：
ifeq ($(strip $(TARGET_BOARD_PLATFORM_PRODUCT)), box)
    #include device/rockchip/common/samba/rk31_samba.mk
    PRODUCT_COPY_FILES += \
      $(LOCAL_PATH)/init.box.samba.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.box.samba.rc \
      device/rockchip/common/cifsmanager.sh:system/bin/cifsmanager.sh

    PRODUCT_PROPERTY_OVERRIDES += \
      ro.rk.screenoff_time=2147483647
else
PRODUCT_PROPERTY_OVERRIDES += \
    ro.rk.screenoff_time=2147483647
endif


2、Y:\repo_rk356x_android13\device\rockchip\rk356x\overlay\frameworks\base\packages\SettingsProvider\res\values\defaults.xml

<?xml version="1.0" encoding="utf-8"?>
<!--
/**
 * Copyright (c) 2009, The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
-->
<resources>
    <integer name="def_screen_off_timeout">60000</integer>
   <!-- Initial value for the Settings.Secure.IMMERSIVE_MODE_CONFIRMATIONS setting,
         which is a comma separated list of packages that no longer need confirmation
         for immersive mode.
         Override to disable immersive mode confirmation for certain packages. -->
    <string name="def_immersive_mode_confirmations" translatable="false">confirmed</string>
    <bool name="def_bluetooth_on">false</bool>
    <bool name="def_accelerometer_rotation">false</bool>

    <!-- 0 == Always sleep
     1 == Do not sleep when plugged in
     2 == Never sleep
    When the screen is off, it will enter the sleep policy.
    You can configure persist.wifi.sleep.delay.ms to delay closing wifi.
    The default is 15 minutes, 0 means that the wifi is turned off
    immediately after the screen is off. -->
    <integer name="def_wifi_sleep_policy">2</integer>

    <!-- Decrease animation duration. -->
    <fraction name="def_window_animation_scale">50%</fraction>
    <fraction name="def_window_transition_scale">50%</fraction>
</resources>


修改为：

<?xml version="1.0" encoding="utf-8"?>
<!--
/**
 * Copyright (c) 2009, The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
-->
<resources>
    <integer name="def_screen_off_timeout">2147483647</integer>
   <!-- Initial value for the Settings.Secure.IMMERSIVE_MODE_CONFIRMATIONS setting,
         which is a comma separated list of packages that no longer need confirmation
         for immersive mode.
         Override to disable immersive mode confirmation for certain packages. -->
    <string name="def_immersive_mode_confirmations" translatable="false">confirmed</string>
    <bool name="def_bluetooth_on">false</bool>
    <bool name="def_accelerometer_rotation">false</bool>

    <!-- 0 == Always sleep
     1 == Do not sleep when plugged in
     2 == Never sleep
    When the screen is off, it will enter the sleep policy.
    You can configure persist.wifi.sleep.delay.ms to delay closing wifi.
    The default is 15 minutes, 0 means that the wifi is turned off
    immediately after the screen is off. -->
    <integer name="def_wifi_sleep_policy">2</integer>

    <!-- Decrease animation duration. -->
    <fraction name="def_window_animation_scale">50%</fraction>
    <fraction name="def_window_transition_scale">50%</fraction>
</resources>


3、
Y:\repo_rk356x_android13\frameworks\base\packages\SettingsProvider\res\values\defaults.xml

<resources>
    <bool name="def_dim_screen">true</bool>
    <integer name="def_screen_off_timeout">60000</integer>
    <integer name="def_sleep_timeout">-1</integer>
    <bool name="def_airplane_mode_on">false</bool>
    <bool name="def_theater_mode_on">false</bool>

修改为：

<resources>
    <bool name="def_dim_screen">true</bool>
    <integer name="def_screen_off_timeout">2147483647</integer>
    <integer name="def_sleep_timeout">-1</integer>
    <bool name="def_airplane_mode_on">false</bool>
    <bool name="def_theater_mode_on">false</bool>

    <bool name="def_lockscreen_disabled">false</bool>
    <bool name="def_device_provisioned">false</bool>
    <integer name="def_dock_audio_media_enabled">1</integer>
修改为：
    <bool name="def_lockscreen_disabled">true</bool>
    <bool name="def_device_provisioned">false</bool>
    <integer name="def_dock_audio_media_enabled">1</integer>


4、【可选】
Y:\repo_rk356x_android13\packages\apps\Settings\res\values\arrays.xml
    <!-- Display settings.  The delay in inactivity before the screen is turned off. These are shown in a list dialog. -->
    <string-array name="screen_timeout_entries">
        <item>15 seconds</item>
        <item>30 seconds</item>
        <item>1 minute</item>
        <item>2 minutes</item>
        <item>5 minutes</item>
        <item>10 minutes</item>
        <item>30 minutes</item>
    </string-array>

    <!-- Do not translate. -->
    <string-array name="screen_timeout_values" translatable="false">
        <!-- Do not translate. -->
        <item>15000</item>
        <!-- Do not translate. -->
        <item>30000</item>
        <!-- Do not translate. -->
        <item>60000</item>
        <!-- Do not translate. -->
        <item>120000</item>
        <!-- Do not translate. -->
        <item>300000</item>
        <!-- Do not translate. -->
        <item>600000</item>
        <!-- Do not translate. -->
        <item>1800000</item>
    </string-array>

修改为：

    <!-- Display settings.  The delay in inactivity before the screen is turned off. These are shown in a list dialog. -->
    <string-array name="screen_timeout_entries">
        <item>15 seconds</item>
        <item>30 seconds</item>
        <item>1 minute</item>
        <item>2 minutes</item>
        <item>5 minutes</item>
        <item>10 minutes</item>
        <item>30 minutes</item>
        <item>Never</item>
    </string-array>

    <!-- Do not translate. -->
    <string-array name="screen_timeout_values" translatable="false">
        <!-- Do not translate. -->
        <item>15000</item>
        <!-- Do not translate. -->
        <item>30000</item>
        <!-- Do not translate. -->
        <item>60000</item>
        <!-- Do not translate. -->
        <item>120000</item>
        <!-- Do not translate. -->
        <item>300000</item>
        <!-- Do not translate. -->
        <item>600000</item>
        <!-- Do not translate. -->
        <item>1800000</item>
        <!-- Do not translate. -->
        <item>2147483647</item>
    </string-array>



原文地址：https://blog.csdn.net/wb4916/article/details/143589727

免责声明：本站文章内容转载自网络资源，如本站内容侵犯了原著者的合法权益，可联系本站删除。更多内容请关注自学内容网（zxcms.com）！

相关文章

自学内容网
Copyright © 2015-2024