自学内容网 自学内容网

LVS+Keepalived群集

Keepalived工具介绍
  • 专为LVS和HA设计的一款健康检查工具
    • 支持故障自动切换(Failover)
    • 支持节点健康状态检查(Health Checking)
Keepalived实现原理刨析
  • Keepalived采用VRRP热备份协议实现Linux服务器的多机热备功能
#主服务器keepalived的安装
[root@localhost ~]# systemctl stop NetworkManager #网络托管 网络管理
[root@localhost ~]# setenforce 0
[root@localhost ~]# systemctl stop firewalld

[root@localhost ~]# yum -y install keepalived ipvsadm
[root@localhost ~]# systemctl enable keepalived

#主服务器keepalived的配置
[root@localhost ~]# cd /etc/keepalived/
[root@localhost keepalived]# cp keepalived.conf keepalived.conf.bak

[root@localhost keepalived]# vi keepalived.conf
global_defs { :w#全局参数
   notification_email {
     acassen@firewall.loc
     failover@firewall.loc
     sysadmin@firewall.loc
   }
   notification_email_from Alexandre.Cassen@firewall.loc
   #vrrp_strict #严格模式 禁用单播模式
   smtp_server 192.168.200.1
   smtp_connect_timeout 30
   router_id LVS_01 #路由器名称
}

vrrp_instance VI_1 { #示例参数
    state MASTER
    interface ens33
    virtual_router_id 51 #虚拟路由id在群集中需一致
    priority 100   #优先级  0~255
    advert_int 1   #通告发送间隔 
    authentication {     
        auth_type PASS #验证类型
        auth_pass 1111 #验证密码
    }
    virtual_ipaddress {
        192.168.10.172
    }
}

virtual_server 192.168.10.172 80 { #群集ip
    delay_loop 6 #健康检查间隔
    lb_algo wrr #负载均衡算法
    lb_kind DR #负载均衡类型
    nat_mask 255.255.255.0 #非不许
!    persistence_timeout 50
    protocol TCP #虚拟服务器协议

real_server 192.168.10.103 80 { #真实服务器
        weight 1 #权重
        TCP_CHECK { #健康检查
            connect_port 80
            connect_timeout 3  
            nb_get_retry 3  #超时次数
            delay_before_retry 3 #重连时间
        }
    }
real_server 192.168.10.104 80 {
        weight 1
        TCP_CHECK {
            connect_port 80
            connect_timeout 3
            nb_get_retry 3
            delay_before_retry 3
        }
    }

}
#主服务器内核参数的配置
[root@localhost ~]# vi /etc/sysctl.conf
#添加
net.ipv4.conf.all.send_redirects = 0
net.ipv4.conf.default.send_redirects = 0
net.ipv4.conf.ens33.send_redirects = 0
[root@localhost ~]# sysctl -p


#开启主服务器的keepalived服务
[root@localhost keepalived]# systemctl start keepalived
[root@localhost keepalived]# ip add show dev ens33
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:0c:29:ae:7f:64 brd ff:ff:ff:ff:ff:ff
    inet 192.168.10.101/24 brd 172.16.16.255 scope global ens33
       valid_lft forever preferred_lft forever
    inet 192.168.10.172/32 scope global ens33
       valid_lft forever preferred_lft forever

#配置从调度器
#从调度器keepalived安装
[root@localhost ~]# systemctl stop NetworkManager
[root@localhost ~]# setenforce 0
[root@localhost ~]# systemctl stop firewalld

[root@localhost ~]# yum -y install keepalived ipvsadm
[root@localhost ~]# systemctl enable keepalived

#从调度器keepalived的配置
[root@localhost ~]# cd /etc/keepalived/
[root@localhost keepalived]# cp keepalived.conf keepalived.conf.bak

[root@localhost keepalived]# vi keepalived.conf
global_defs {
   notification_email {
     acassen@firewall.loc
     failover@firewall.loc
     sysadmin@firewall.loc
   }
   notification_email_from Alexandre.Cassen@firewall.loc
   #vrrp_strict
   smtp_server 192.168.200.1
   smtp_connect_timeout 30
   router_id LVS_02
}

vrrp_instance VI_1 {
    state BACKUP #备份
    interface ens33
    virtual_router_id 51
    priority 99
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        192.168.10.172
    }
}

virtual_server 192.168.10.172 80 {
    delay_loop 6
    lb_algo rr
    lb_kind DR
    nat_mask 255.255.255.0
!    persistence_timeout 50
    protocol TCP

    real_server 192.168.10.101 80 {
        weight 1
        TCP_CHECK {
            connect_port 80
            connect_timeout 3
            nb_get_retry 3
            delay_before_retry 3
        }
    }
    real_server 192.168.10.102 80 {
        weight 1
        TCP_CHECK {
            connect_port 80
            connect_timeout 3
            nb_get_retry 3
            delay_before_retry 3
        }
    }

}
#从服务器内核参数的配置
[root@localhost ~]# vi /etc/sysctl.conf
在末尾添加:
net.ipv4.conf.all.send_redirects = 0
net.ipv4.conf.default.send_redirects = 0
net.ipv4.conf.ens33.send_redirects = 0
[root@localhost ~]# sysctl -p
#开启从服务器的keepalived服务
[root@localhost keepalived]# systemctl start keepalived
#web网络的配置
[root@localhost ~]# systemctl stop firewalld
[root@localhost ~]# cd /etc/sysconfig/network-scripts/
[root@localhost network-scripts]# cp ifcfg-lo ifcfg-lo:0
[root@localhost network-scripts]# vi ifcfg-lo:0
DEVICE=lo:0
IPADDR=192.168.10.172
NETMASK=255.255.255.255
ONBOOT=yes
[root@localhost network-scripts]# systemctl restrt network
[root@localhost network-scripts]# vi /etc/rc.local
/sbin/route add -host 192.168.10.172 dev lo:0
[root@localhost network-scripts]# route add -host 192.168.10.172 dev lo:0
#httpd服务的安装
[root@localhost ~]# yum -y install httpd
[root@localhost ~]# vi /var/www/html/index.html
test web01
#内核参数的设置
[root@localhost ~]# vi /etc/sysctl.conf
net.ipv4.conf.all.arp_ignore = 1
net.ipv4.conf.all.arp_announce = 2
net.ipv4.conf.default.arp_ignore = 1
net.ipv4.conf.default.arp_announce = 2
net.ipv4.conf.lo.arp_ignore = 1
net.ipv4.conf.lo.arp_announce = 2
#开启httpd服务
[root@localhost ~]# systemctl start httpd

原文地址:https://blog.csdn.net/weixin_67764171/article/details/140213478

免责声明:本站文章内容转载自网络资源,如本站内容侵犯了原著者的合法权益,可联系本站删除。更多内容请关注自学内容网(zxcms.com)!