gd32F470配置RTC时钟

rtc.c

#include "rtc.h"

#define BKP_VALUE    0x32F0

rtc_parameter_struct   rtc_initpara;
__IO uint32_t prescaler_a = 0, prescaler_s = 0;
uint32_t RTCSRC_FLAG = 0;

ErrStatus RtcInit(void)
{
    rcu_periph_clock_enable(RCU_PMU); /* enable PMU clock */
    pmu_backup_write_enable();/* enable the access of the RTC registers */
    rtc_pre_config();//配置外部低速时钟32.768KHz
    RTCSRC_FLAG = GET_BITS(RCU_BDCTL, 8, 9);/* get RTC clock entry selection */

    if ((BKP_VALUE != RTC_BKP0) || (0x00 == RTCSRC_FLAG))/* check if RTC has aready been configured */
{ 
        return rtc_setup(); 
    }
return SUCCESS;
}
void rtc_pre_config(void)
{
rcu_osci_on(RCU_LXTAL);
rcu_osci_stab_wait(RCU_LXTAL);
rcu_rtc_clock_config(RCU_RTCSRC_LXTAL);

prescaler_s = 0xFF;
prescaler_a = 0x7F;
rcu_periph_clock_enable(RCU_RTC);
rtc_register_sync_wait();
}
ErrStatus rtc_setup(void)
{
    rtc_initpara.factor_asyn = prescaler_a;
    rtc_initpara.factor_syn = prescaler_s;
    rtc_initpara.year = 0x24;//2024年
    rtc_initpara.day_of_week = RTC_MONDAY;//星期一
    rtc_initpara.month = RTC_FEB;//二月
    rtc_initpara.date = 0x05;//五日
    rtc_initpara.display_format = RTC_24HOUR;
    rtc_initpara.am_pm = RTC_AM;

rtc_initpara.hour = 0x09;//9点
rtc_initpara.minute = 0x52;//52分
rtc_initpara.second = 0x00;//0秒

    if(ERROR == rtc_init(&rtc_initpara))
{
        return ERROR;
    }
else
{
        RTC_BKP0 = BKP_VALUE;
    }
return SUCCESS;
}
void rtc_show_time(void)
{
    rtc_current_time_get(&rtc_initpara); 
printf("Current date: %0.2x/%0.2x/%0.2x   \r\n", \
          rtc_initpara.year, rtc_initpara.month, rtc_initpara.date);
    printf("Current time: %0.2x:%0.2x:%0.2x   \r\n", \
          rtc_initpara.hour, rtc_initpara.minute, rtc_initpara.second);
}

rtc.h

#ifndef __RTC_H
#define __RTC_H

#include "head.h"

ErrStatus RtcInit(void);
void rtc_show_time(void);
void rtc_pre_config(void);
ErrStatus rtc_setup(void);

#endif

main.c

#include "head.h"

int main(void)
{
    systick_config();//时钟配置
gd_485_com_init(PCS_COM,9600);
gd_485_com_en(1);//发送使能

    RtcInit();

    while(1)
{
rtc_show_time();
delay_1ms(1000);
}
}

原文地址：https://blog.csdn.net/m0_61973119/article/details/136036923

免责声明：本站文章内容转载自网络资源，如本站内容侵犯了原著者的合法权益，可联系本站删除。更多内容请关注自学内容网（zxcms.com）！